Top Fite Home  
  Where to BuyDownload BrochuresContact Us

Focke-Wulf 190 D9 (TOPA0150)
Tech Notices

Notice #1: Top view is longer than side view on plans. Cut 5/16" off the T.E of main stringer, as seen from the top view of the plans, to the move the fin forward.

Notice #2: On page 32, the 1/8" x 3/16" x 16" stick goes on the PLY side as described in step 26 not on the balsa side as shown in the sketch.

We apologize for any confusion this may have caused.

Top Flite



© 1997-2017 Hobbico, Inc. All rights reserved. Terms of Use