Top Fite Home  
  Where to BuyDownload a CatalogContact UsSuggested Engines & Radio Systems
HomeTop Flite AirplanesGold Edition KitsGold Edition ARFsControl Line ARFsAccessoriesMonoKoteLustreKoteEconoKoteProduct ReviewsTechnical DataParts Listings, Plans & ManualsGlossary of TermsFAQs, Service & Contact InformationRepair ServicesInformation for RetailersLink to Top FliteDownload wallpaperPromotions

Products - Frequently Asked Questions (FAQ)

I am trying to assemble multiple pieces of sheeting for my model. Can you help make this easier?

HOW TO JOIN SHEETING

Photo 1

A. Use a metal straightedge as a guide to trim one edge of both sheets.

Photo 2

B. Use masking tape to tightly tape the two sheets together joining the trimmed edges.

Photo 3

C. Turn the sheet over and place weights on top of the sheet to hold it. Apply thin CA sparingly to the seam between the two places, quickly wiping away excess CA with a paper towel as you proceed.

D. Turn the sheet over and remove the masking tape, then apply thin CA to the seam the same way you did for the other side.

E. Sand the sheet flat and smooth with your bar sander and 150-grit sandpaper.

Back to main FAQ/Contact Info page

Copyright © 2000-2010 Hobbico®, Inc. Terms of Use | Privacy Statement
All rights reserved. Do not duplicate or redistribute in any form.